Nozzles - Problems with nozzles and what problem nozzles do
Inspecting the operating parameters, control of the fuel dosage setting determines the condition of the injectors on the individual cylinders. Depending on the system, acceptable dosage adjustments for injectors may be 1 mg, 2 mg, or even 4 mg per injection. It is assumed that if the injector has a fuel dose correction above 4 mg, this suggests nozzle damage.
Recommendation of similar texts:
Hi there, I am Mladen and I am an auto enthusiast. I started this blog years ago to help like minded people share information about latest cars, car servicing ideas, used car info, exotic cars, and auto technology. You will find helpful articles and videos on a wide variety of cars - Audi, Mercedes, Toyota, Porsche, Volvo, BMW and much more. Ping us if you have anything cool to share on latest cars or on how to make older cars more efficient, or just want to say hi!
13 Comments
Leave a reply to Marjan Camaj Cancel reply
Sorry, in order to post a comment, you must be logged in.
can it cause the turbine to turn off badly, i'm talking about audi a4 b7 tdi 2007. thanks in advance
I want to ask if the oil warning sign could come on if the oil surplus is in the engine and the oil sensor comes on after moving for polo 1.2 petrol
thanks in advance for your reply
a little more thrown when firing ciroen jumper 2.8
hello Blagoy Marotov from Mk .. my question is for mercedes w204 125hp 2007 god.auto works normally, towing normally, only when heated and stopped in the back, at traffic lights or anywhere, the engine is uneven, see also the arrow rpm going up and down, I changed 2 fuel pressure regulators, it's the same again, so it's another problem..please tell me what could be.. hello thanks ..
I have the same problem, my automaton is nice towing and it works, but when I drive it and stop at the traffic light my father shakes for a second as if to raise a little bit and turn it down and after a certain time the same, there was one nozzle problem I did yes but the problem remained, now i don't even know what to do anymore, if you solved the problem please share with others. Greeting
pos
The same thing happens to me on Passau 6. Did you break the fault
passat b5.5 1.9tdi, cool fires well, works fine on back, pulls fine, but when warmed up and extinguished when ignition of vergl for a long time then lit. means a long vergla to ignite when the engine is warming up. one nozzle on the diagnosis shows a difference from the other three. Well, it ejects black smoke when the accelerator pedal is squeezed a little more.
Due to a faulty electronic nozzle on the mercedes sprinter, incorrect engine operation, my flywheel went out, the bolts on the bosch pump cracked, as well as the pipes from the bosch pump on the nozzles. Also due to the high vibration, the engine mounts went.
Hello, this is how I have a problem with the Audi A3 1.9 77kw in 2006, 310000 crossed the car when it was idling for 5 minutes and when I wanted to go, it emitted a huge amount of black smoke and booze and something was heard in the engine to shoot like that. the smoke then goes normally it just happened to me at the start in first and second gear samk is black smoke and I noticed that I have increased fuel consumption
Hi, I have a problem with increased consumption of 15-17l per city. I have a mercedes e250 w212 with 204 horsepower. The car does not have a single error, multiple diagnoses are made and many things are controlled. In the Mercedes, I updated the engine computer thinking it wasn't chipped but still the same. Exhaust gases ok, no smoke, nice operation of the tractor,… .. Is it possible that the nozzles are in question considering that I have 208000km? Thanks in advance
Hello, I have had a problem for 2 years now. The mechanic did not solve it for me
It's about the car actually starting, but as if it lacks fuel, it shakes and sometimes it shuts down, sometimes it manages to stay in operation, it only happens when the engine has been running for a while, so I leave it for 5 minutes and then again when it needs to be started. if anyone has an idea please help thanks
100% of the nozzles are a real problem, the overhaul didn't help me either, I just solved this problem by replacing it.
Greeting new member of
It's a golf 3 1.9turbo diesel, it works fine, it starts fine, everything is ok, it just happens to me while driving when I add gas, the car starts to shake, and as soon as it changes to a little. More revs, everything is normal again.
Any help is welcome ..
Pozz..Thanks in advance🙂