Peugeot 206 - The most common problems and failures

3 Peugeot , Used cars,
Peugeot 206

Peugeot 206

What are the most common Peugeot 206 failures and how to fix them?

Peugeot 206 - ALL MODELS
Issue - Startup error, battery drained.
Cause - Battery connector (s) incorrectly installed.
Repair - Make sure that the battery terminals are properly installed and properly installed.

Peugeot 206 - ALL MODELS
Issue - Control airbag light illuminates constantly or occasionally.
Cause - Cushion air spiral cables defective.
Repair - Check the date of manufacture on the steering column control module. If the production date is before 27.05.2005. Replace steering column control module module.

Peugeot 206 - ALL MODELS
Issue - Punching from the front suspension.
Cause - Worn ball joints on balance bar.
REPAIR - Replace the ball joints of the balance bar, ie the entire balance bar.

Peugeot 206 - ALL MODELS
Issue - The fuel gauge does not read the fill when the tank is full.
Cause - Multifunction Control Module Software Error.
Repair - Re-program the multifunction control module with the upgraded software.

Peugeot 206 - ALL MODELS
Issue - Clutch shake when clutch is activated at 2000 rpm.
Cause - Defective clutch pressure plate.
Repair - Replace the clutch pressure plate.

Peugeot 206 - ALL MODELS
Issue - Engine malfunction indicator illuminated, cold engine gas poorly received, engine malfunctioning and idle.
Cause - Stacked soot deposits in the cylinder head inlets.
Repair - Remove the suction branch, check for soot deposits in the inlets of the cylinder head and clean them if necessary, add the cleaning additive to the fuel tank, repeat the procedure if necessary.

Peugeot 206 - PETROL 1.6 16V
Issue - A squeal from the front brakes.
Cause - The linings vibrate in the tongs.
Repair - Install modified front finishes.

Peugeot 206 - PETROL 1.6 16V
Issue - Bad starting from a cold start, the engine shuts down and loses power.
Cause - Defective hydraulic exhaust valve lifters.
Repair - Install modified hydraulic exhaust valve lifters.

Peugeot 206 - ALL DIESELS
Issue - The engine coolant temperature indicator illuminates, but the engine temperature gauge reads as normal. Turning on the air conditioner affects the operation of the engine coolant temperature indicator.
Cause - Defective engine coolant fan motor relay.
Repair - Replace all three relays.

Source: autoportal.hr

Recommendation of similar texts:

Tags: , ,

Related posts

About The Author

Hi there, I'm Mladen and I'm an auto enthusiast. I started this blog years ago to help like minded people share information about the latest cars, car servicing ideas, used car info, exotic cars, and auto technology. You will find helpful articles and videos on a wide variety of cars - Audi, Mercedes, Toyota, Porsche, Volvo, BMW and much more. Ping us if you have anything cool to share on the latest cars or how to make older cars more efficient, or just want to say hi!

3 Comments

  • Vladimir says:
    23/08/2020 at 2:53 pm

    Respect. Vozim Peugeot 206 1.4 2004 God. The problem with the gas, ie. now it can't develop a speed higher than 90 / h even though I drove it on the highway at 120-130 on Friday. If anyone can give me an answer I would be grateful. Pozz and thanks in advance.

  • Dejan says:
    01/03/2021 at 11:23 am

    206 1.1 poorly receives gas is extinguished on the flight and throws the car on the exhaust what is it if someone knows

  • A CA says:
    14/09/2021 at 5:54 pm

    Respectfully. if a sign appears on the board that I am not connected and the car does not have this function, then the scale will not start until I stop the car, turn it off and start again
    What is the cause of this problem and what needs to be done
    Best regards Aca

Leave a reply