Renault Clio - The most common problems and malfunctions
Renault Clio
What are the most common problems and breakdowns of Renault Clio and how to solve them?
Renault Clio - ALL GASOLINE
PROBLEM - Loss of engine power, engine failure.
CAUSE - The valve does not open or close properly due to accumulated deposits in the valve body.
REPAIR - Remove the valve body and clean the deposits on the inside of the valve.
Renault Clio - ALL GASOLINE
PROBLEM - Illuminates to indicate engine failure, loss of engine power, poor engine performance.
CAUSE - Engine computer software error.
REPAIR - Reprogram the engine computer with upgraded software.
Reno Clio - ALL GASOLINES
PROBLEM - Alternator control indicator illuminates, engine noise, loud noise from the auxiliary drive belt.
CAUSE - Faulty alternator pulley.
REPAIR - Check alternator pulley for damage, replace if necessary. Check the alternator for damage. Replace if necessary.
Renault Clio 1.4 16V
PROBLEM - The engine starts hard, loses power and shuts down, does not work properly at idle.
CAUSE - Engine computer software error.
REPAIR - Reprogram the engine computer with upgraded software.
Renault Clio 1.5 dCi
PROBLEM - Startup error.
CAUSE - Water enters the fuse box / relay plate in the engine compartment. Corrosion.
REPAIR - Place a protective cover (160 mm) and tape (130 mm) on the electrical installation assembly of the fuse box / relay board in the engine compartment. Check the condition of the fuse box / relay plate and replace if necessary. Check engine control relay and replace if necessary. Apply adhesive tape to the edge of the fuse box in the motor / relay panel cover area.
Renault Clio 1.5 dCi I 1.9 dCi
PROBLEM - It is not possible to start after replacing the timing belt.
CAUSE - Valve phase incorrectly adjusted after timing belt replacement, valve phase incorrectly adjusted due to camshaft pulley error.
REPAIR - Remove the camshaft pulley and check for damage, replace parts if necessary.
Renault Clio 1.5 dCi I 1.9 dCi
PROBLEM - Periodic startup error. The engine sometimes shuts down.
CAUSE - Faulty crankshaft position sensor.
REPAIR - Replace the crankshaft position sensor.
Renault Clio - ALL MODELS WITH MANUAL GEARBOX
PROBLEM - Transmission oil leaking, difficult to change gears.
CAUSE - Damaged sealing mechanism seal.
REPAIR - Replace the voter seal.
Retrieved from: autoportal.hr
Recommendation of similar texts:
Hi there, I am Mladen and I am an auto enthusiast. I started this blog years ago to help like minded people share information about latest cars, car servicing ideas, used car info, exotic cars, and auto technology. You will find helpful articles and videos on a wide variety of cars - Audi, Mercedes, Toyota, Porsche, Volvo, BMW and much more. Ping us if you have anything cool to share on latest cars or on how to make older cars more efficient, or just want to say hi!
renault clio 1.5dci 2006 god. The question is what could be wrong with the clio 3
Hello,
on a 2007 renault clio III, i noticed oil first on the front right and then the front left fender. The oil seal on the left gearbox pins has been changed, but occasionally there is still a trace of oil. When driving, a feeling of lack of power and unusually high friction when crossing bumps in the road.
1/2 year ago great service done and engine rate replaced.
What do you think could be the cause of the appearance of oil on the inside of the fenders?